SAE/EN Hydraulic Hose for Wire-Braided and Spiral Circuits

YAKE manufactures hydraulic rubber hoses identified by SAE 100R and EN designation families, with published size and pressure tables for petroleum-based hydraulic fluid service.

Hydraulic Hose Families Available from YAKE

Select the reinforcement family first, then confirm bore, working pressure, bend radius, and temperature against the published table for that designation.

One- and two-wire braided hydraulic hose

One- and Two-Wire Braided Hoses

Includes SAE 100R1AT / EN 853 1SN and SAE 100R2AT / EN 853 2SN style lines, plus EN 857 1SC/2SC compact braid options used when a thinner cover envelope or compact routing is required.

Medium to high pressure circuits with petroleum-based hydraulic oil

Textile-covered DIN-style braid hose

Textile-covered and DIN-style braid variants

Includes SAE 100R1A/DIN EN 853 1ST and SAE 100R2A/DIN EN 853 2ST constructions for buyers specifying DIN/EN braid cover presentations.

Designation and cover presentation match to the RFQ

Multi-spiral high-pressure hydraulic hose

Multi-spiral high-pressure hoses

Includes SAE 100R9/R10/R12/R13/R15 and EN 856 4SP/4SH style spiral constructions for higher working-pressure hydraulic service.

High-pressure and heavy-duty hydraulic lines

Full metric/imperial tables for hose ID, wire OD, hose OD, working pressure, proof pressure, burst pressure, minimum bend radius, and weight are published in the YAKE catalog by designation.

Selection Problems These Hose Pages Are Built to Answer

Wire braided hydraulic hose construction

RFQ says SAE or EN, but the offer only shows a marketing name

Buyers cannot compare quotations when designations are missing. YAKE catalogs map constructions to SAE 100R and EN families and publish working, proof, and burst pressure by size so purchasing and engineering can check the same row.

Braid versus spiral hose reinforcement

Braid hose is quoted where spiral duty is required

Using a braid hose in a higher-pressure spiral duty raises failure risk under pulse loads. The family block separates braid, compact braid, and multi-spiral options before size selection.

Crimped hydraulic hose assembly

Bulk hose arrives without a usable assembly path

Many projects need cut length and fittings, not only hose meters. YAKE supports crimped hose assemblies after designation, length, and fitting ends are confirmed.

YAKE certificates

Mining or support equipment adds documentation checks

For listed high-pressure and hydraulic-support ranges, YAKE holds mining product safety marks with model scopes. Use those ranges when the RFQ requires mining-duty documentation; do not treat every hydraulic hose as mining-marked.

Why Spec Buyers Start with YAKE Hose Tables

  • Designation-first cataloging across braid and spiral families
  • Size tables that include working, proof, and burst pressure plus minimum bend radius
  • One factory path from hose production to crimped assembly discussion
  • Selected spiral and support hose ranges carry mining safety marks where listed

How to Read a YAKE Hydraulic Hose Spec Row

Confirm the designation, then read hose ID, reinforcement OD, hose OD, working pressure, proof pressure, burst pressure, minimum bend radius, and weight. Temperature windows commonly appear as -40°C to +100°C or -40°C to +120°C depending on the designation family in the catalog. Use the exact row for the bore you are ordering; do not assume the highest pressure on a family applies to every size.

Designation groupReinforcement ideaTypical fluid stated in catalogTemp window examples in catalog
SAE 100R1AT / EN 853 1SNOne steel wire braidPetroleum-based hydraulic fluids-40°C to +100°C
SAE 100R2AT / EN 853 2SNTwo steel wire braidsPetroleum-based hydraulic fluids-40°C to +100°C
EN 857 1SC / 2SCCompact braid constructionsPetroleum-based hydraulic fluids-40°C to +100°C
SAE 100R12 / R13 / R15 and EN 856 4SP / 4SHMulti-spiral steel wirePetroleum-based hydraulic fluidsoften -40°C to +120°C on listed spiral pages

Applications for SAE/EN Hydraulic Hose

  • Mobile construction and industrial hydraulic power circuits carrying petroleum-based hydraulic oil
  • Machine tools and stationary hydraulic units where braid or spiral pressure class must match the pump circuit
  • Mining and hydraulic-support equipment when the selected YAKE range is among the mining safety-marked models
  • Replacement and OEM harness work that needs matching designation, bore, and bend-radius limits

Manufacturing and Compliance Context

Hebei Yake Rubber & Plastic Products Co., Ltd. manufactures hydraulic rubber hoses in Jing County, Hengshui, Hebei, with extrusion, steel-wire braiding, spiral winding, hose-assembly crimping, and pressure testing. Production references GB/T and MT/T practice and DIN industrial standards alongside SAE/EN designation families. YAKE states ISO 9001:2015, ISO 14001:2015, and ISO 45001:2018 management-system certification. Selected multi-spiral and hydraulic-support hose ranges carry mining product safety marks under applicable GB/T and MT/T references.

Workshop
Braiding or spiral area
Crimping station
Pressure-testing area

Buyer FAQ

How do I pick braid vs spiral?

Match the RFQ pressure class and pulse duty first. Use braid families for typical SAE 100R1/R2 and EN 853/857 circuits; move to multi-spiral families when the circuit calls for R12/R13/R15 or EN 856 4SP/4SH style pressure ratings.

Are catalog temperatures universal?

No. Use the temperature window printed for the specific designation row in the YAKE catalog.

Can YAKE supply assemblies from these hoses?

Yes. Confirm designation, length, and fitting ends, then request a crimped assembly discussion.

Explore Mining Hose AssembliesExplore Hose Assemblies and FittingsContact YAKE

Request a Hose Quote

Send designation, size, working pressure, medium, fittings, length, and quantity.

SAE/EN Hydraulic Hose Products

Wire-braided and spiral hydraulic hoses manufactured by YAKE — size, pressure and medium confirmed on RFQ.

Download Catalog